85
Producing with the knitting machine 3
Threading up yarn
Threading thre ads through yarn control device
3.2.4 Threading threads through yarn control device
Path of th e thread th rough the yarn con trol devic e
Path of the thread through the yarn control device
1. Bring thread break control in work position.
Pull thread break control a little towards left till
it is not held by the stopping
cam anymore.
2. Thread each thread through a yarn control device as shown in the picture.
Thread the yarns through the yarn length measuring device *
3.2.5 Thread the yarns through the yarn length measuring
device *
Path of th e thread through t he yarn le ngth measu ring devi ce
Path of the thread through the yarn length measuring device
➜ Push thread upward with both hands through the threading gap and lay it
around the measuring wheel.
Further information:
Symbols in this document [16]
To Next Page
Loading...