243
Adjusting knitting machine 4
Advanced adjustments
Normal yarn carrier type 2
4.2.26 Normal yarn carrier type 2
Normal yarn carrier type 1 Normal yarn carriers and intarsia yarn carriers cannot be used on the same
track.
Reason: The disengaging arms (1) of the norm
al yarn carrier collide with the
intarsia yarn carrier or the yarn carrier limiter.
Possible combinations for normal yarn carrier
s type1 and type2:
Each combination can be used with itself or with another combination.
: Equip the yarn carrier tracks from inward to
outward.
Normal yarn carrier type 2 That's why a new normal yarn carrier has
been developed.
It has got no disengaging arms but lifters (2), similar to the intarsia yarn carrier.
T
hus, this yarn carrier can be used with intarsia yarn carriers on the same
track.
The normal yarn carrier type 2 is used for:
"n
ormal" knitting
The
yarn carrier knits for example the 2x1 fabric start, and some intarsia
yarn carriers are additionally located on the same rail.
You had to use an intarsia yarn carrier for the 2x1 fabric start so far (c
ost
saving).
Plating with 2 yarn carriers.
The
normal yarn carrier type 2 is used for plating. This was not possibl
e
before.
To Next Page
Loading...