503
Software - Installation and basic settings 8
Installing the Stoll operating system
Carrying out a restart (Restart)
8.4.4 Carrying out a restart (Restart)
A restart is carried out when the software no longer reacts to inputs following
an error.
Carry out a restart:
1. Set machine main switch to 0.
T
he switch-off process takes approx. 60 seconds. When the process
is c
omplete, the touch screen becomes dark.
2. Set the main switch to 1.
The "BootOkc" window is displayed on
the touch screen.
BootOkc window
"BootOkc" window
3. For the automatic warm start within the waiting time tap on the key
"Restart".
The machine is configured.
Finally th
e window "Reference runs " is displayed.
4
. Carry out reference run(s).
5. Proceed to the next window.
The
restart is complete and the
"Main menu" is displayed.
The machine is ready to knit.
Further information:
Setting touch screen [80]
Setting waiting time until warm start [473]
To Next Page
Loading...