473
Software - Installation and basic settings 8
Boot process
Selecting the source of the installation data (Boot Source)
Selecting the source of the
installation data (Boot
Source)
In the "Boot Source" area of the "Basic Settings Menu" window ascertain the
source from where the installation of the Stoll operating system is done.
Selection of the source in Basic Settings Menu window
Selection of the source in "Basic Settings Menu" window
Keys in t he Boot S ource are a of the Ba sic Settings Menu window
Keys in the "Boot Source" area of the "Basic Settings Menu" window
Setting waiting time until warm start
Setting waiting time until
warm start
In this area of the "Basic Settings Menu" window, the waiting time that is spent
in between the display of the "BootOkc" window, and the automatic warm start
(display of the main menu) is entered.
Waiting time for w arm start in th e Basic Sett ings Menu win dow
Waiting time for warm start in the " Basic Settings Menu" window
Set waiting time:
1. Pull the slide to the desired position.
The waiting time is displayed in the input field.
2. Confirm
input.
Key
Explanation
Current Version (HD)
Renewed installation of the existing version.
New Version (HD)
Installation of a new version.
Previous Version (HD)
Installation of the previous version.
Network
Installation of a version from a network drive.
USB Device
Installation of a version from a device which is
connected to the USB socket.
User Defined Path
Installation of a version from a user-defined
storage location.
Change Path
Key for selection of a storage location.
The waiting time can be interrupted at anytime by pressing any
key in the "Basic Settings" window.
To Next Page
Loading...