Stoll CMS 520 C+ - Intarsia Yarn Carrier - Correct Stopping Point (Correction Value)

239
Adjusting knitting machine 4
Advanced adjustments
Intarsia yarn carrier - Corre ct stopping p oint (correction value) *
4.2.24 Intarsia yarn carrier - Correct stopping point (correction
value) *
Keys for correcting the stopping point
Keys for correcting the stopping point
1. Call up the "Yarn carrier" window.
2. Tap the "Adjusting yarn carriers" key.
3. Enter the yarn carrier correction value.
4. Confirm entries.
5. Return to the "Yarn carrier" window.
Further information:
 Adjusting yarn carriers [137]
 Intarsia yarn carrier - Adjust
stoppin
g point (basic setting, braking value)*
[228]
 Intarsia yarn carrier - check the pr
essure plates * [237]
 Adjusting yarn carriers (Setup2) [140]
 Adjusting yarn carriers (Setup1) [142]
 Symbols in this document [16]
Key Function
Call up the "Yarn carrier" window
Call up the "Adjusting yarn carrier" window