467
Software - Installation and basic settings 8
Software - Installation and basic settings
8 Software - Installation and basic
settings
In this chapter the description of how can one install and set the Stoll operating
system is given.
It is important thereby that one gets to know the
boot process (the booting of
software and the activation of control) on the knitting machine.
One has to engage in this boot process du
ring installation and setting of the
Stoll operating system.
Thereby call up various windows e.g. the "Basic Settings Menu" window.
For the setting of the Stoll operating system more windows are op
en i
n which
the changes can be made.
If your knitting machines are interconnected or are connected with a pattern
unit, you can
configure the on-line connection.
This chapter contains information on:
Boot process [468]
Saving all machine data on the
USB-Memory-Stick [483]
Saving pattern after a big fault [484]
Installing the Stoll operating system [4
86]
Diagnose Control [509]
Save the machine data against any data losses before every
installation of Stoll operating system or before any changes in
the configuration.
To Next Page
Loading...