Stoll CMS 520 C+ - Cleaning the knitting machine

347
Maintenance of the knitting machine 6
Cleaning the knitting machine
Cleaning the knitting machine
6.2 Cleaning the knitting machine
To retain the operability of the knitting machine and ensure the quality of the
fabric, the knitting machine must be cleaned regularly.
Cleaning plan
Cleaning plan
We recommend the use of following cleaning agent:
Cleaning agent
Cleaning agent
Cleaning interval Cleaning work
if necessary Cleaning the touch screen
6 to 24 operating hours Cleaning suction and lint container
daily Vacuuming off knitting machine
Cleaning needle bed
Cleaning thread clamping and cutting
de
vice
Cleaning the active thread clamp
Cleaning the permanent brakes
Cleaning the friction feed wheel
100 operating hours Cleaning main drive fan
once a month Cleaning fan and radiators in right control
unit
Cleaning filter mat of power supply unit
3 to 6 months Thoroughly cleaning needle bed
6 months Clean the knitting systems
Cleaning agent Cleaning work
Cloth, suction, compressed
air
on the entire knitting machine
Special cleaning agent for
plexiglas (note the
manufacturer's
specifications)
Touch screen and covers
Cleaning petrol (note the
manufacturer's
specifications)
Roller rubber of the take-down roller
NOTICE
Plastics, in particular the transparent covers, may not be
cleaned with alcohol or spirit, but instead only with a special
cleaning agent for plexiglas.