Stoll CMS 520 C+ - Control Devices; Impulse Sensor

46
2 Description of knitting machine
Control devices
2.5 Control devices
Impulse sensor
2.5.1 Impulse sensor
Impulse sensor
Impulse sensor
The impulse sensor (1) scans the grooves and trick walls on the impulse
sensor rail on the front and rear guide rail for the carriage assembly. It
recognizes the position of the carriage assembly and specifies the time for the
selection of the selection jacks by the selection systems.
Depending on the machine gauge, there is a front and a rear impulse sen
sor
rail.
Machine gauge Impulse sensor rail
E 18 (E 9.2)
E 16 (E 8.2)
E 14 (E 7.2)
E 12 (E 6.2)
E 10 (E 5.2)
Front and Rear
E 8
E 7 (E 3,5.2)
E 5 (E 2,5.2)
E 4
E 3.5
E 3
Rear