350
6 Maintenance of the knitting machine
Cleaning the knitting machine
Cleaning suction and lint container *
6.2.2 Cleaning suction and lint container *
1. Stop knitting machine when carriage is located on right half of needle bed.
2. Slide on cover over needle bed.
3. Push locking of lint container inwards and pull a
way container upwards.
Lint conta iner and f ilter
Lint container and filter
4. Empty the lint container.
5. Clean filter (1) of lint container.
6. Reinstate the lint container.
7. Remove left rear panel segment.
8. Clean motor cover.
Cleaning motor cover
Cleaning motor cover
To Next Page
Loading...