203
Adjusting knitting machine 4
Advanced adjustments
Carry out the reference run
4.2.8 Carry out the reference run
Following all repair and conversion work on the carriage assembly or on the
needle bed, a reference run must be carried out.
The reference run is carried out with
the following steps:
Calling up and noting the machine data
Carrying out the reference run
Calling up and correcting the mach
ine data
Loading the knitting program and determining the racking reference da
ta
Keys for carrying out a reference run
Keys for carrying out a reference run
Call up and note machine
data
1. Call up the "Service" menu.
2. Call up "Basic Settings" menu.
3. Call up the "Machine parameters" window.
Key
Function
Call up the "Service" menu
Call up the "Basic settings" menu
Returning to the previous window
Call up "Machine parameters" window
Open the "Needle bed parameters" window
Call up "NPK values" window
Call up "Needle selection" window
Call up "Reference runs" window
Call up "Main menu"
Call up "Machine start" window
To Next Page
Loading...