504
8 Software - Installation and basic settings
Installing the Stoll operating system
Carrying out restart with machine configuration (Restart and Configuration)
8.4.5 Carrying out restart with machine configuration (Restart
and Configuration)
A restart with the machine configuration is carried out after a gauge conversion
or after attaching special attachments.
Carry out restart with machine configuration:
The
machine is switched off.
1. To switch on the
machine, set the main switc
h to 1.
The "BootOkc" window is displayed on
the touch screen.
BootOkc window
"BootOkc" window
2. For the automatic warm start within the waiting time tap on the "Restart
and Configuration" key.
The Restart Process gets started.
After the process is
shut, the "Language" window is displayed.
3. Se
lect the dialog language and confirm the selection.
4.
Proceed to the next window.
The "Machine configuration" window is displayed. The data have been
set at the factory and will not be changed.
5.
Proceed to the next window.
The "Machine configuration 2" window is displayed. The data have
been set at the factory and will not be changed.
6. P
roceed to the next window.
The "Machine Options" window is displayed. The d
ata is set at the
factory.
To Next Page
Loading...