354
6 Maintenance of the knitting machine
Cleaning the knitting machine
Cleaning the friction feed wheel *
6.2.8 Cleaning the friction feed wheel *
Cleaning the friction feed wheel
Cleaning the friction feed wheel
1. Vacuum off the fluff and dust from the friction feed wheel.
2. Remove dirt (e. g. paraffin) from the friction rollers.
Further infor
mation:
Symbols in this document [16]
Cleaning main drive fan *
6.2.9 Cleaning main drive fan *
1. Switch off the machine and wait until the machine is currentless.
2. Swing open the cover on the right-han
d control unit.
Main drive fan
Main drive fan
3. Clean fan.
4. Close the cover on the right con
trol unit.
5. Switch on machine.
Further information:
Symbols in this document [16]
The control checks the motor temperature when switching on
machine main switch. The fan only runs at higher motor
temperature.
To Next Page
Loading...