Stoll CMS 520 C+ - Lubricate knitting machine

359
Maintenance of the knitting machine 6
Lubricate knitting machine
Lubricate knitting machine
6.3 Lubricate knitting machine
This chapter contains information on:
 Lubrication interval [360]
 Setting lubricating interval for needle bed [362]
 Setting of central lubrication [363]
 Oil needle bed [367]
 Restarting lubricating interval [368]
 Oiling jack bed [368]
 Oiling yarn carrier rods [369]
 Oiling the control of the holding-dow
n jacks [36
9]
 Oiling carriage guide rail [369]
 Greasing impulse sensor rails [370]
 Greasing butts of the coupling parts and intermediate sliders [371]
 Oiling lifting slide (yarn c
arrier plunger) [37
1]
 Greasing the control sliders (CMS 822) [372]
 Greasing racking device [372]
 Grease needle bed support/adjustment pieces [374]