375
Repairing the knitting machine 7
Supplementary activities during maintenance
Repairing the knitting machine
7 Repairing the knitting machine
This chapter contains information on:
Supplementary activities during main
tenance [375]
Helpful knitting rows [378]
Replacing parts [380]
Eliminating faults in e
lectron
ics system [439]
Check fuses [447]
Needle selection displacement [453]
Entering the data of the needle sele
ction d
isplacement manually [464]
Supplementary act ivities during maintenance
7.1 Supplementary activities during
maintenance
This chapter contains information on:
Switching power supply 40 V off and on [375]
Central lubrication - mo
unting
and working position [377]
Switching power supply 40 V o ff and on
7.1.1 Switching power supply 40 V off and on
The power supply of the carriage (step motors, selection systems, yarn carrier
plunger) can be switched off for assembling works. This eliminates the
switching off and on of the main machine switch and thereby the waiting time
until the computer of the knitting machine has shut down and rebooted.
The machine cannot be started with the engaging rod when the power
supply
is switched off.
Keys for s witching power supply 40 V off / on
Keys for switching power supply 40 V off / on
Key
Function
Call up the "Service" menu
Call up window "Manual interventions Service"
Confirm message
Call up "Main menu"
To Next Page
Loading...