376
7 Repairing the knitting machine
Supplementary activities during maintenance
Switch power supply off and on again:
1. Call up the "Service" menu from the "Main menu".
2. Call up from"Service" window "Manual interventions Service".
Window Manual interventions Service
Window "Manual interventions Service"
3. Tap the "Off" switch if the "40 Volt power supply" is to be switched off.
Answer the message "Switch off?" with "Yes".
- or -
➜ Tap the "On" switch if the "40Volt power
supply" is to be switched on. Tap
the "Confirm message" key. The machine is ready for operation.
4. Call up "Main menu".
To Next Page
Loading...