118
3 Producing with the knitting machine
Eliminating errors in the fabric
Threading up thread into yarn carrie r
3.5.2 Threading up thread into yarn carrier
Keys for threading up thread into yarn carrier
Keys for threading up thread into yarn carrier
1. Call up "Manual interventions" window.
2. Tap the (1) "YC bolt up" key.
3. Note the position of the yarn carrier and
push the yarn carrier outward
below the carriage.
4. Thread-up yarn carrier.
5. Push the yarn carrier into its previous position again.
6. Tap the (4) "YC bolt bottom" key.
Key
Function
Call up "Manual interventions" window
Call up "Machine start" window
You can switch on shortly the corresponding feed wheel (60
seconds) to ensure that the yarns run easily over the rollers.
Turn on the switch (2) or (3) for
this.
To Next Page
Loading...