117
Producing with the knitting machine 3
Eliminating errors in the fabric
1. If threads are broken, thread them up again.
2. Call up "Machine start" window.
3. Call up the "Picking-up after press
ing-off" function. Tap the "P.aft. press-
off M1 from line" key for this purpose.
4. Tap on the input fields. Enter values an
d confirm inputs.
5. Start the machine with the engaging rod.
6. When the set number of knitting r
ows has bee
n processed, the machine
stops automatically.
The "Place fabric in fabric take-down" message appears.
7. When
the fabric is long enough to be placed in the main take-down or t
he
belt take-down, open the take-down, place the fabric in the take-down and
close the take-down.
8. If the fabric cannot be placed in the main take-down or the be
lt ta
ke-down,
repeat points 2 through 8.
9. Start the machine with the engaging rod
. The knitting program is started
automatically.
Further information:
Threading up yarn [82]
NOTICE
If you notice defective needles while picking-up after pressing-
off:
➜ Stop picking-up after pressing-off and replace the defective
needles
.
To Next Page
Loading...