Stoll CMS 520 C+ - Greasing Impulse Sensor Rails

370
6 Maintenance of the knitting machine
Lubricate knitting machine
Greasing impulse sensor rails
6.3.10 Greasing impulse sensor rails
Depending on the machine gauge, there is a front and a rear impulse sensor
rail.
Greasing the impulse sensor rails
Greasing the impulse sensor rails
➜ Use a brush to apply grease to the impulse giver rails (1).
Machine gauge Impulse sensor rail
E18 (E9.2)
E16 (E8.2)
E14 (E7.2)
E12 (E6.2)
E10 (E5.2)
front and rear
E8
E7 (E3,5.2)
E5 (E2,5.2)
E4
E3.5
E3
Back