474
8 Software - Installation and basic settings
Boot process
Configure machine
Configure machine Defined by the concept of control OKC some basic information about the
machine should be known right from the start. Enter this information in the
"Machine Configuration" window.
➜ Tap on the "Machine configuration" key.
T
he "Machine Configuration" window is displayed.
Machine Configuration window
"Machine Configuration" window
Components of the Machine Configuration window
Components of the "Machine Configuration" window
Label
Description
Machine Classification
Enter the machine classification.
Component Type
Enter the component type.
Controller
Characteristic
Name of the control unit (only display)
Date
Entry of the date
Time
Entry of the time
Time Zone
Entry of the time zone
Autoadjust clock for
daylight saving
Automatically switch the clock to summer- or
wintertime.
Motor Types
Select which motor (different motors with
different ID) is installed in the machine. (Might
be necessary after replacing a motor)
To Next Page
Loading...