Stoll CMS 520 C+ - Page 131

131
Adjusting knitting machine 4
Basic settings
Carriage speed (Setup2)
Carriage speed (Setup2)
Carriage speed window
"Carriage speed" window
Carriage speed Setup2
Explanation Value range (meters/
second)
MSEC Speed
(normal speed)
Minimum value: 0.05
Maximum value: 1.20
Step width: 0.05
MSEC0 Speed for empty rows (S0) Minimum value: 0.05
Maximum value: 1.40
Step width: 0.05
MSEC1 Speed for transfer rows Minimum value: 0.05
Maximum value: 1.20
Step width: 0.05
MSECI Speed with Intarsia Yarn Carrier
(CMS ADF-3:
Specification is not taken
into account)
Minimum value: 0.05
Maximum value: 1.00
(CMS-C: 0.7)
Step width: 0.05
MSECC Speed outside the needle bed when
the yarn carrier is brought in the clamp
or taken out of the clamp.
Minimum value: 0.05
Maximum value: 0.50
Step width: 0.05
MSECK Carriage speed for small knots over m
rows, standard: 1 row
Minimum value: 0.05
Maximum value: 1.20
Step width: 0.05
MSEC2-20 Speed for knitting rows Minimum value: 0.05
Maximum value: 1.20
Step width: 0.05
Comment Comment ASCII Characters