190
4 Adjusting knitting machine
Advanced adjustments
5
Switch fluff absorption on or off.
The needle beds in the knitting area are
vacuumed off with the fluff
absorption automatically. This does not interrupt ongoing knitting
process. We recommend switching on the fluff absorption
permanently.
The settings for the fluff absorption always remain saved, even when
the operating system is loaded again.
Interval
Periodic switch on and off of the suction device.
After n courses: Number of courses without suction (1
course =
2 rows)
For n courses:
Number of courses with suction
Stroke
"optimised": The cleaning row is carried out only in
SEN area.
"maximum":
The cleaning row is carried out over the
entire needle bed.
Explanation
To Next Page
Loading...