Stoll CMS 520 C+ - Page 455

455
Repairing the knitting machine 7
Needle selection displacement
Machines for which the impulse sensor type has to be set.
If you are not sure about the machine type, check the machine type plate.
The first column of numbers in the "Type" field indicates the machine
type and
the second column of numbers indicates the component type. In the above
example, the machine in question is the "621" type, and the "000" component
type.
OKC 2.0
(2005 until February
2009)
CMS933 769 000 - 004
CMS922 770 000 - 004
CMS830 C 573 000 - 004
CMS822 574 000 - 005
CMS740 572 000 - 004
CMS730 T 586 000 - 004
CMS730 S 554 000 - 004
CMS530 T 585 000 - 004
CMS530 566 000 - 004
CMS520 C 570 000 - 004
CMS520 567 000 - 004
CMS420 E 579 000 - 004
Type Component type