488
8 Software - Installation and basic settings
Installing the Stoll operating system
Select Boot Source The machine is switched off.
1. Set the main switch to 1.
The "BootOkc" window is displayed on
the touch screen.
BootOkc window
"BootOkc" window
2. For the automatic warm start, tap on the "Basic Settings" key within the
waiting time.
The "Basic Settings Menu" window is d
isplayed.
3. Select a source for the installation data in the "Boo
t Source" section.
4. .Confirm input
The "BootOkc" window is displayed.
5. Continu
e with the next section.
Start installation 1. When you want to execute the installation with the final configuration,
tap
in the "BootOkc" window on the "Installation and Configuration" key.
- or -
➜ When you want to execute the
installation without the final configuration,
tap in the "BootOkc" window on the "Installation" key.
In the "User Message" window (INSTALLATION STARTED!) the path
to the installation data
is displayed.
To Next Page
Loading...