Stoll CMS 520 C+ - Page 519

519
Yarns and stitch tension 9
Yarn table
Yarn table 2Yarn table - Allocation of machine gauge and yarn thickness (Table 2)
Yarn table - Allocation of machine gauge and yarn thickness (Table 2)
Further information:
 Economic production and the influencing factor
s [511]
Gauge assembled processing
[Nm]
Final count [Nm]
12
1 x 24/2
2 x 44/2
10 - 18
14
1 x 28/2
2 x 40/1
14 - 20
16
1 x 48/2
1 x 54/2
1 x 60/2
20 - 30
18
1 x 54/2
1 x 60/2
1 x 80/2
20 - 40
20 1 x 80/2 20 - 40
2,5.2
(all needles)
3 x 28/2
2 x 14/2
3 - 4,5
2,5.2 m.4L All needles: 3 x 28/2 Nm 3 – 4,5
Every 2nd needle: 8 x 28/2
Nm
1,3 - 2
Every 2nd needle with
cast-off technique:
maximum13 x 28/2 Nm
1,1
2,5.2 (CMS 830 C)
(each 2nd needle)
3 x 14/2
6 x 14/2
1 - 2
2,5.2
(each 2nd needle)
3 x 14/2
4 x 14/2
1,3 - 2
3,5.2
(all needles)
2 x 28/2
3 x 28/2
4,5 - 7
3,5.2
(each 2nd needle)
3 x 14/2
7 x 28/2
1,5 - 2,5