528
10 CMS 822 - Operating modes and particularities
Operating modes of CMS 822
Setting knitting machine to
operating mode
The "Tandem with comb" operating mode must be set in the "Machine
configuration 2" window.
Keys for s etting th e operating mode
Keys for setting the operating mode
1. Call up the "Main menu".
2. Call up the "Service" menu.
3. Call up the "Basic settings" menu.
4. Call up the "Machine config
uration 2" me
nu.
Tandem with comb settin g
"Tandem with comb" setting
5. Check the setting in the "Tandem with comb" field. "Yes" must be selected
for the "Tandem with comb" operating mode.
6. If the setting is "Yes", the operating mod
e is set properly. The setting
process is complete. Call up the "Main menu" window.
7. If the setting is "No", change it to "Yes".
Confirm input. A reference run
must be carried out after the operating mode has been changed.
Further information:
Carry out the reference run [203]
Key
Function
Call up "Main menu"
Call up the "Service" menu
Call up the "Basic settings" menu
Open the "Machine configuration 2" menu
Confirm input
To Next Page
Loading...