60
2 Description of knitting machine
Display and operating elements
Please observe in position 3 1. When the covers are closed, the engaging rod is held by a magnet
(production at normal speed).
2. When the covers hoods are open (e.g. during set-up and checking work)
the engag
ing rod is not held by a magnet and must be held in position 3
by hand. If the engaging rod is released, it immediately falls into position 1
and stops the machine (dead man's switch in accordance with EN 11 111).
The maximum carriage speed with open safety doors can be set.
Further information:
Setting machine parameters [197]
DANGER
Danger by parts of needles which have broken off!
Danger of injury to eyes by parts of needles.
➜ Wear
safety glasses.
To Next Page
Loading...