93
Producing with the knitting machine 3
Production
Keys to apply the shape counters
Keys to apply the shape counters
Apply shape counter:
1. Call up the window "Machine start" from the
"Main menu".
2. Tap on "Additional function keys".
3. Tap the "Apply shape counter" key.
Confirm the prompt that follows with "YES"
.
The values of the shape counter are applied to the new pattern.
4. Tap
the "SP from line 1" key.
Converting a basic pattern
into a sh
aped pattern
Further information:
Configuring monitoring [173]
Key
Function
Call up "Machine start" window
Call up "Additional function keys"
"Apply shape counter" key
A small trick - with an impressive effect
Using a small trick you can easily convert a basic pattern into a
fully fashion pa
ttern on the M1plus.
Converting a basic pattern into a shaped
pattern:
➜ Open the basic pattern on the M1plu
s.
(The technical processing has not yet be
en done.)
➜ Select the "Generate Pure Shape" function in the "Shape"
menu.
-
> An empty, rectangular shape with the
size of the pattern
will be opened.
➜ Carry out technical processing
The bas
ic pattern is automatica
lly converted into a fully
fashion pattern, the corresponding specifications are
entered into the knitting program (PF0, "ff-trans" function,
this function contains the casting-off and widening until the
new knitting width).
To Next Page
Loading...