Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
DIAG:ITEM? 2 mi
ght return
:DIAG:ITEM 2,"Acquisition","Pass",0,8,
indicating that the acquisition test passed and that there w ere 0 failures of the
8 subitems for that test.
DIAg:ITEM:F
AILURES? (Query Only)
This query-only command returns the total number of failures. This command
is equivalent to selecting Instrument Diagnostics from the Utilities menu and
then revie
wing the Diagnostic Status.
This query-only c ommand can be issued while diagnostics are still in progress.
Gr
oup
Diagnostics
Syntax
DIAg:ITEM:FAILURES? <NR1>
Related Commands
DIAg:ITEM?, DIAg:ITEM:NAMe?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
Arguments
<NR1> sets the index item about which data will be returned, which ranges from
0 through 15.
Examples
DIAG:ITEM:FAILURES? 2 might return : DIAG:ITEM:FAILU RES 2,0,
indicating that there were 0 failures for item 2.
DIAg:ITEM:NAMe? (Query Only)
This query-only command returns the name of the selected menu item. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Subsystem, Area and Test settings.
This query-only c ommand can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:ITEM:NAMe? <NR1>
Related Commands
DIAg:ITEM?, DIAg:ITEM:FAILURES?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
2-166 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English