Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:DDRMemory:REFL evel:DATA:MID <NRF>
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:REFLevel:DATA:MID?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:AUTOReflevel
Arguments
<NRF> specifies the value of the data MID reference level in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:REFLEVEL:DATA:MID 1.5 sets
the data MID reference level to 1.5 volts.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:REFLEVEL:DATA:MID? might
return
:SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:REFLEVEL:DATA:MID
1.0000
, indicating that the data MID reference level is set to 1.0 volt.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH
This command sets or queries the value of the strobe HIG H reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value only when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:REFLevel:STROBE:HIGH
<NRF>
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:REFLevel:STROBE:HIGH?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:AUTOReflevel
Arguments
<NRF> specifies the value of the strobe HIGH reference level in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:REFLEVEL:STROBE:HIGH 5.0
sets the st
robe HIGH reference level to 5.0 volts.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:REFLEVEL:STROBE:HIGH?
might ret
urn
:SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:STROBE:HIGH
0.000
, indicating that the strobe HIGH reference level is set to 0 volt.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-439

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English