Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
REF1:HORIZONT
AL:POSITION?
might return :REF1:HORIZONTAL:POSITION
50
, indicating that the Reference 1 waveform is centered on the horizontal
graticule.
REF<x>:LABe
l? (Query On ly )
This query-only command returns a branch query containing the waveform label
name and the coordinates at which the label (attached to the displayed waveform
of the spec
ified reference) is displayed. The reference waveform is specified
by x. The value of x can range from 1 through 4. This command is equivalent
to selecting Reference Waveforms from the File menu and then choosing Label
from the drop-down list.
Group
Vertical
Syntax
REF<x>:LABel?
Related Commands
REF<x>:LABel:NAMe, REF<x>:LABel:XPOS, REF<x>:LABel:YPOS
Arguments
None.
Examples
REF1:LABEL? might return :REF1:LABEl:NAME
"Myname";:XPOS-200;:YPOS
50.
REF<x>:LABel:NAMe
This command sets or queries the label of the designated waveform. The reference
waveform is specified by x. The value of x can range from 1 through 4. This
command is equivalent to selecting Reference Waveforms from the File menu,
choosing Label from the drop-down list, selecting the tab associated w ith the
reference for which you want to create a label, and entering a label in the Label
box.
Group
Vertical
Syntax
REF<x>:LABel:NAMe <QString>
REF<x>:LABel:NAMe?
Related Commands
REF<x>:LABel?
2-418 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English