Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
ALIas:DELEte
:ALL (No Query Form)
This command deletes all existing aliases.
Group
Alias
Syntax
ALIas:DELEte:ALL
Related Commands
ALIas:DELEte, ALIas:DELEte:NAMe
Examples
ALIAS:DELETE:ALL deletes all existing aliases.
ALIas:DELEte:NAMe (No Query Form)
This command removes a specified alias. An error mes sage is generated if the
named alias does not exist. This command is identical to ALIas:DELEte.
Group
Alias
Syntax
ALIas:DELEte:NAMe <QString>
Arguments
<QString> is the name o f the alias to remove. Using ALIas:DELEte: NAMe
without specifying an alias causes an exception error. <QString> must be a
previously defined alias.
Examples
ALIAS:DELETE:NAME "STARTUP" deletes the alias named STARTUP.
ALIas:STATE
This command turns aliases on or off and is identical to the ALIas command. The
query form of this command returns the state of the aliases.
Group
Alias
Syntax
ALIas:STATE {OFF|ON|<NR1>}
ALIas:STATE?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-85

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English