Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:WINdo w?
Examples
TRIGGER:A:PULSE:WINDOW? might return
:TRIGGER:A:PULSE:WINDOW:T YPE INSI
DE; WHEN OCCURS;WIDTH
2.0000e-9; LOGIC:INPUT:CH1 HIGH;CH2 X; CH3 X; CH4
LOW; :T RIGGER:A:PULSE: WINDOW:LOGIC:THRESHOLD:CH1
1.2000;CH2 1.2000;CH3 1.2000;CH4 1.2000;
:TRIGGER:A:PULSE:WINDOW:T HRESHOLD:HIGH 1.2000;LOW
800.0000E-3
.
TRIGger:{A|B}:PULse:WINdow:EVENT
This command sets or queries the window trigger event. This command i s
equivalent to selecting Window Setup from the Trig menu and selecting from
the Window Event box.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:WINdo w:EVENT
TRIGger:{A|B}:PULse:WINdo w:EVENT?
Arguments
OUTSIDEGreater specifies a trigger event when the signal leaves the window
defined by the threshold levels for the time specified by Width.
INSIDEGreater specifies a trigger event when the signal enters the window
defined by the threshold levels for the time specified by Width.
ENTERSWindow specifies a trigger event when the signa l enters the window
defined by the threshold levels.
EXITSWindow specifies a trigger event when the signal leaves the window defined
by the threshold levels.
Examples
TRIGGER:A:PULSE:WINDOW:WH EN OCCURS sets the widow violation qualifier
to OCCURS, w hich causes a trigger to occur when the instrument detects any
window violation.
TRIGGER:A:PULSE:WINDOW:WH EN? might return
:TRIGGER:A:PULSE:WINdow:W HEN OCCURS, indicating that a trigger will
occur if the instrument detects any window violation.
2-546 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English