Commands Listed in Alphabetical Order
<NR1> =0remove
s waveforms from the display; any other value displays the
waveforms.
Examples
DISPLAY:WAVEFORM OFF removes waveforms from the display.
DISPLAY:WAVEFORM? might return :WAVEFORM 1, indicating that waveforms
are displayed.
EMail (No Query F orm)
This command (no query form) sends a test e-mail me ssage or sets the current
e-mail sent count to zero.
Group
E-mail
Syntax
EMail { TESt|RESET}
Arguments
TESt argument sends a test e-mail me ssage.
RESET argument sets the e-mail sent count to zero.
Examples
EMAIL T EST
This command sends a tes t e-mail.
EMAIL R ESET resets the sent mail c ount to zero.
EMail:ATTempts
This command sets or queries the number of times that an attempt will be made to
send e-mail to the SMTP e -mail server. The default is 1.
Group
E-mail
Syntax
EMail:ATTempts <NR1>
EMail:ATTempts?
Arguments
NR1 can be 1 through 20. This number is the specified number of attempts that
will be made to send e-mail to the SMTP server.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-201
To Next Page
Loading...
Need help?
General
