Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:TIMEStamp:REF< x>?
Examples
HORIZONTAL:TIMESTAMP:REF1 ? might return
:HORIZONTAL:TIMESTAMP:REF 1 "timestamp not available", indicating
that the timebase for the Reference 1 waveform is not available.
ID? (Query Only)
This query-only command returns identifyi
ng information about the instrument
and related firmware.
Group
Miscellaneous
Syntax
ID?
Related Commands
*IDN?
Examples
ID? might return :TEK/DPO7104,C F:91.1CT,FV:4.0.0, indicating that the
instrument model number is set to TEK/DPO7104, configured format is set to
CF:91.1CT, and firmware version number is set to FV:4.0.0 .
*IDN? (Query Only)
This query-only command returns the instrument identification code.
Group
Miscellaneous
Syntax
*IDN?
Related C
ommands
ID?
Examples
*IDN? might return :TEKTRONIX,DPO7104,10000001,CF:91.1C T
FV:01.00.912,
, indicating the instrument model number, serial number,
configured number, and
firmware version number.
2-264 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English