Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:PUL
SE:TRANSITION? might return
:TRIGGER:A:PULSE:TRANSITI ON:DELTATIME
2.0000E-9;POLARITY POSITIVE;THRESHO LD:HIGH 1.2000;LOW
800.0000E-3;:TRIGGER:A:PU LSE:TRANSITION:WHEN SLOWE RTHAN
indicating the current transition time trigger settings.
TRIGger:{A|B}:PULse:TRANsition:DELTATime
This comma
nd sets or queries the delta time used in calculating the transition
value for the transition trigger. This is equivalent to selecting Transition Setup
from the Trig menu and setting the Time.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:TRANs ition:DELTATime <NR3>
TRIGger:{A|B}:PULse:TRANs ition:DELTATime?
Related Commands
TRIGger:{A|B}:PULse:TRANsition:POLarity, TRIGger:{A|B}:PULse:
TRANsition:THReshold?
Arguments
<NR3> specifies the delta time, in seconds.
Examples
TRIGGER:A:PULSE:TRANSITIO N:DELTATIME 15E-6 sets the delta time of
the transition trigger to 15 µs.
TRIGGER:A:PULSE:TRANSITIO N:DELTATIME? might return
:TRIGGER:A:PULSE:TRANSITI ON:DELTATIME 2.0000E-09, indicating that
the delta time of the transition trigger is set to 2 ns.
TRIGger:{A|B}:PULse:TRANsition:POLarity
This command sets or queries the polarity for the transition trigger. This command
is equivalent to selecting Transition Setup from the Trig menu and choosing from
the Polarity pull-down list.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:TRANs ition:POLarity
{POSITIVe|NEGAtive|EITher }
TRIGger:{A|B}:PULse:TRANs ition:POLarity?
2-536 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English