Tektronix DPO70000 Series Programmer's Manual

Command Groups
Command
Description
NEWpass
Changes the password for user protected
data
PASSWord Provides access for changing user protected
data
REM
Specifies a c
omment, w hich is ignored by
the instrument
ROSc:SOUrce Sets or queries the selected source for the
time base reference oscillator
ROSc:STATE? Returns whether the time base reference
oscillat
or is locked
ROSc:TRA
Cking
Sets or qu
eries the selected source for the
time base reference oscillator. The reference
oscillator locks to this source
SET? Returns a listing of instrument settings
TEKSecure Initializes both waveform and setup
memori
es
TIME
Sets o
r returns the time displayed by the
instrument
*TRG Performs the group execute trigger (GET)
*TST? Tests the GPIB interfac e and returns status
UNLo
ck
Unlocks front panel
VER
Bose
Sets or returns the verbose state
Sa
ve and Recall Command Group
UsethecommandsintheSaveandRecallCommand Group to store and retrieve
internal waveforms and settings. When you save a setup, you save all the settings
o
f the instrument. When you recall a setup, the instrument restores itself to the
state that it was in when you originally saved that setting.
Command
Description
*RCL Restores the state of the instrument from a
copy of the setting stored in memory
*SAV Stores the current instrument state to a
specified memory location
*SDS Changes the specified setup to reference the
factory setup instead of the u ser setup
DELEte:SETUp Removes stored setups from memory and
initializes the location with the factory default
setups
DELEte:WAVEform Deletes (one or all of) the stored reference
waveforms from memory
2-44 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English