Commands Listed in Alphabetical Order
Syntax
EMail:HOSTwan
ted {<QSt ring>}
EMail:HOSTwanted?
Arguments
<QString> argument is a string that specifies the host name to be used with the
SMTP e-mail server if the default DPO host name will not work.
Examples
EMAIL:HOSTWANTED "LazyEight" specifies that LazyEight will be used as the
host name when sending e-mail to the SMTP e-mail server.
EMAIL:HOSTWANTED? might return :EMAIL:HOSTW ANTED "LazyEight",
indicating that LazyEight is the host name used with the SMTP e-mail server.
EMail:IMAGe
This command sets or queries whether a sc reen image is included in e-mail. If
this command is se
t to ON, the format and content of the screen image included is
specified using the EXPort commands within the Hard Copy Command group.
Group
E-mail
Syntax
EMail:IMAGe {ON|OFF|NR1}
EMail:IMAGe?
Related Commands
EXPort
Arguments
ON argument enables the inclusion of a screen image in e-mail.
OFF argument disables the inclusion of a screen image in e-mail.
<NR1> = 0 disables the inclusion of a screen image in e-mail; any other value
enables the inclusion of a screen image in e-mail.
Examples
EMAIL:IMAGE 1 enables the inclusion of a screen image in e-mail.
EMAIL:IMAGE? might return :EMAIL:IMAGE 0 indicating that a screen image
is not included in the e-mail.
EMail:MASK
This command sets or queries whether e-mail is sent when a mask test failure
occurs.
2-204 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
