Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
OUTside specifi
es the outside limits.
WIThin specifies the inside limits.
Examples
SEARCH:SEARCH1:TRIGGER:A: WIDTH:WHEN OUTSIDE sets the width trigger
for search 1 to outside limits.
SEARCH:SEARCH1:TRIGGER:A: WIDTH:WHEN? might return
:SEARCH:SEARCH1:TRIGGER:A :WIDTH:WHEN WITHIN, indicating that the
width trigger for search 1 is set to inside limits.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT
This command sets or queries the w indow trigger search to determine where to
place a mark.
<x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:WINdow:EVENT
{OUTSIDEGreater|INSIDEGre ater|ENTERSWindow|EXITSWindow}
SEARCH:SEARCH<x>:TRIGger: A:WINdow:EVENT
?
Arguments
OUTSIDEGreater specifies a trigger event when the signal leaves the window
define
d by the threshold levels for the time specified by Width.
INSIDEGreater specifies a trigger event when the signal enters the window
defin
ed by the threshold levels for the time specified by Width.
ENTERSWindow specifies a trigger event when the signa l enters the window
defi
ned by the threshold levels.
EXITSWindow specifies a trigger event when the signal leaves the window defined
by
the threshold levels.
Examples
SEARCH:SEARCH1:TRIGGER:A: WIDTH:EVENT OUTSIDEGREATE R sets the
window trigger for search 1 specifies a trigger when the signal leaves the window
defined by the threshold levels for the time s pecified by width.
SEARCH:SEARCH1:TRIGGER:A: WIDTH:EVENT? might return
:SEARCH:SEARCH1:TRIGGER:A :WIDTH:EVENT ENTERSWINDOW, indicating
that the window trigger for search 1 specifies a trigger when the signal enters the
window defined by the threshold levels.
2-482 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English