Commands Listed in Alphabetical Order
Syntax
MASK:USER:VSC
Ale <NR3>
MASK:USER:VSCAle?
Related Commands
MASK:USER:VOFFSet, MASK:USER:VPOS
Arguments
<NR3> is a floating point number that sets the nominal bit width in seconds.
Examples
MASK:USER:VSCALE 200E-3 sets the user mask nominal vertical scale to
200 millivolts per division.
MASK:USER:VSCALE? might return :MASK:USER:VSCALE 1.0000E-3,
indicating that the nominal vertical scale of the displayed mask is set to 1 millivolt
per division.
MASK:USER:WIDth
This command sets or returns the nominal bit width in seconds. The query form
of this command returns the bit width value of the displayed mask. The set form
of this command only affects the user mask, regardless of the current (displayed)
mask.
Group
Mask
Syntax
MASK:USER:WIDth <NR3>
MASK:USER:WIDth?
Related Commands
MASK:USER:TRIGTOSAMP
Arguments
<NR3> is a floating point number that sets the nominal bit width in seconds. This
is the time of one bit of data where bit width = 1 / (data rate of the signal).
Examples
MASK:USER:WIDTH 648E-9 sets the u ser mask nominal bit width to 648
nanoseconds (1.544 Mbits/second).
MASK:USER:WIDTH? might return :MASK:USER: WIDTH 1.0000E-3,
indicating that the nominal vertical scale of the displayed mask is set to 1 millivolt
per division.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-343
To Next Page
Loading...
Need help?
General
