Tektronix DPO70000 Series

Commands Listed in Alphabetical Order
DISPLAY:SCREE
NTEXT:LABEL3:YPOS?
might return
:DISPLAY:SCREENTEXT:LABEL3 :YPOS 192, indicating that screen Label 3 is
vertically positioned to 192.
DISplay:SCR
EENTExt:STATE
This command controls the display of screen text.
Group
Display Control
Syntax
DISplay:SCREENTExt:STATE {ON|OFF|<NR1>}
Related Commands
DISplay:SCREENTExt?, DISplay:SCREENTExt:LABel<x>?, DISplay:
SCREENTExt:LABel<x>:NAMe, DISplay:SCREENTExt:LABel<x>:XPOS,
DISplay:SCREENTExt:LABel<x>:YPOS
Arguments
ON turnsonthedisplayofscreentext.
OFF turns off the d isplay of screen text.
<NR1> = 0 disables screen text; any other value enables screen text.
Examples
DISPLAY:SCREENTEXT:STATE ON turns the screen text display on.
DISPLAY:SCREENTEXT:STATE? might return :DISPL AY:SCREENTEXT:STATE
1
, indicating that the screen text is displayed.
DISplay:SHOWREmote
This command sets or queries the state of the remote display feature and is
equivalent to selecting Display Remote from the Display menu. The query form
of this command returns ON (1) or OFF (0).
This feature allows you to v iew waveforms and other graticule data on a remote
display using remote control software like VNC (Virtual Network Computing) or
Symantec pcAnywhere.
Group
Display Control
Syntax
DISplay:SHOWREmote {ON|OFF|NR1}
DISplay:SHOWREmote?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-197