Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:SETHOLD:CLOCK:TH RESHOLD:CH2 ECL
sets
the Channel 2 setup/hold trigger clock threshold setting for search 1 to ECL.
SEARCH:SEARC
H1:TRIGGER:A:SETHOLD:CLOCK :THRESHOLD:CH1?
might
return
:SEARCH:SEARCH1:TRIGGER:A:S ETHOLD:CLOCK:THRESHOLD:CH1
–1.3000
, indicating that the Channel 1 setup/hold trigger clock threshold setting
for search 1 is set to -1.3 volts.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>
This command sets or queries the clock threshold setting for a setup/hold trigger
search to
determine where to place a mark. <x> is the search number or math
waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :SETHold:CLOCk:THReshold:MATH<x>
{NR3|ECL|TTL}
SEARCH:SEARCH<x>:TRIGger:A :SETHold:CLOCk:THReshold:MATH<x>?
Arguments
<NR3> is the clock level, in volts.
ECL specifiesapresetECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.
Examples
SEARCH:SEARCH1:TRIGGER:A:S ETHOLD:CLOCK:THRESHOLD:MATH2 ECL
sets the clock threshold setting of the Math 2 waveform for a setup/hold trigger
search to ECL.
SEARCH:SEARCH1:TRIGGER:A:S ETHOLD:CLOCK:THRESHOLD:MATH1? might
return
:SEARCH:SEARCH1:TRIGGER:A:S ETHOLD:CLOCK:THRESHOLD:MATH1
1.4000
, indicating that the clock threshold setting of the Math 1 waveform for a
setup/hold trigger search is set to 1.4 volts.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>
This command sets or queries the clock threshold setting for a setup/hold trigger
search to determine where to place a mark. <x> is the search number or reference
waveform number.
Group
Search and Mark
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-463

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English