Commands Listed in Alphabetical Order
Arguments
<NR3> sets the l
evel 1 value used by autoset for user masks.
Examples
MASK:AUTOSET:USER:ONE 1 sets the autoset for 1 in user masks is 1.0 volts.
MASK:AUTOSET:USER:ONE? might return :MASK:AUTOSET:USER:ONE 0.0000,
indicating that the autoset is using 0.0 volts for 1 in user masks.
MASK:AUTOSet:USER:TYPe
This command sets or queries h ow autoset scales a mask.
Group
Mask
Syntax
MASK:AUTOSet:USER:TYPe {ABSolute|NORMALIZ ed}
MASK:AUTOSet:USER:TYPe?
Related Commands
MASK:AUTOSet:USER:ONE, MASK:AUTOSet:USER:ZERo
Arguments
ABSOLUTE tells autoset to use the values supplied by MASK:AUTOSet:USER:
ONE and MASK:AUTOSet:USER:ZERo for the one and zero of the mask.
NORMALIZED tells autoset to determine the m ask one and zero by looking at the
mask.
Examples
MASK:AUTOSET:USER:TYPE NORMALIZED sets the autoset scales in a mask
to normalize.
MASK:AUTOSET:USER:TYPE? might r eturn :MASK:AUTOSET:USER: TYPE
NORMALIZED
, indicating that the autoset is set to normalize scales in a mask.
MASK:AUTOSet:USER:ZERo
This command sets or queries the level 0 used by autoset for user masks.
Group
Mask
Syntax
MASK:AUTOSet:USER:ZERo <NR3>
MASK:AUTOSet:USER:ZERo?
Related Commands
MASK:AUTOSet:USER:TYPe, MASK:AUTOSet:USER:ONE
2-298 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
