Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
DISplay:COLO
r:PALEtte:USEr:CH<x>
This command sets or queries the hue-lightness-saturation (HLS) triplet to be used
for the specified channel color for the user palette. The channel is specified by x.
The value of x
can range from 1 through 4.
Group
Display Control
Syntax
DISplay:COLOr:PALEtte:USE r:CH<x> <NR1>,<NR1>,<NR1>
DISplay:COLOr:PALEtte:USE r:CH<x>?
Arguments
<NR1> Hue. Range of 0 to 360.
<NR1> Lightness. Range of 0 to 100.
<NR1> Saturation. Range of 0 to 100.
Examples
DISplay:COLOr:PALEtte:USE r:CH1 330,75,100 sets a user palette of hue
= 330, lightness = 75, and saturation = 100 for Channel 1.
DISplay:COLOr:PALEtte:USE r:CH2? might return
:DISPLAY:COLOR:PALETTE:US ER:CH2 325,65,100 indicating
that Channel 2 color for the user p alette is set at 325 for hue, 65 for lightness,
and 100 for saturation.
DISplay:COLOr:PALEtte:USEr:GRAticule
This command sets or queries the user palette graticule color
. It assigns the
hue-lightness-saturation triplet to be used for the graticule color for the user
palette.
Group
Display Control
Syntax
DISplay:COLOr:PALEtte:USE r:GRAticule <NR1>,<NR1>,< NR1>
DISplay:COLOr:PALEtte:USE r:GRAticule?
Arguments
<NR1> Hue. Range of 0 to 360.
<NR1> Lightness. Range of 0 to 100.
<NR1> Saturation. Range of 0 to 100.
2-182 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English