Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
<NR3> is the hys
terisis amount in percent.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:HYSTERISIS 0.10 sets the
hysterisis for DDR memory searches to 0.10 percent.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:HYSTERISIS? might return
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:HYSTERISIS 1.00 00 indicating
the h ysterisis for DDR memory searches is set to 1.0 percent.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin
This command sets or queries the termination logic margin for back-to-back
writes.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:MARgin <NR3>
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:MARgin?
Arguments
<NR3> is the termination logic margin in percent.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:MARGIN 1.0000 sets the
termination logic margin to 1.0 percent.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:MARGIN? might return
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:MARGIN 0.0000 indicating the
termination logic margin is set to 0.0 percent.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas
This command sets or queries the maximum distance, in clock periods, to the left
of the s tart of the mark where the instrument looks for the chip-select pulse.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:MAXCas <NR3>
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:MAXCas?
Arguments
<NR3> is the max imum distance, in clock periods, to the left of the start of the
mark where the instrument looks for the chip-select pulse.
2-436 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English