Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
HISTOGRAM:FUN
CTION HOR IZONTAL
sets the histogram mode to the horizontal
display mode.
HISTOGRAM:FU
NCTION?
might return :HIST OGRAM:FUNCTION VERTICAL,
indicating that the vertical display mode is selected for the histogram.
HIStogram:MODe
This command selects the type of histogram to create or disables the histogram
display. The q uery form either returns the current histogram type or that histogram
display is disabled. This command is equivalent to selecting Waveform Histogram
from the M
easure menu and then choosing from the Histogram Mode group box.
HIStogram:MODe is functionally equivalent to the HIStogram:FUNCtion and
HIStogr
am:STATE commands and is included for backward compatibility
purposes.
Group
Histogram
Syntax
HIStogram:MODe {HORizontal|VERTical |OFF}
HIStogram:MODe?
Related Commands
HIStogram:FUNCtion, HIStogr
am:STATE, HIStogram:DISplay
Arguments
HORizontal enables a horizontally positioned histogram that shows time
distribution.
VERTical enables a vertically positioned histogram that shows a voltage
distribution (or another distribution such as amperes).
OFF disables collection of the histogram measurement.
Examples
HISTOGRAM:MODE HORIZONTAL sets the type of histogram created to horizontal,
which displays a horizontally positioned histogram that shows time distribution.
HISTOGRAM:MODE? might return :HISTOGRAM:MODE OFF, indicating that
histogram display is disabled.
HIStogram:SIZe
This command sets or queries the width or height of the histogram on the screen.
This is equivalent to selecting Waveform Histograms from the Measure menu and
then entering a value in the Histogram Size box.
2-236 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English