Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:PUL
SE:CLASS WIDTH
specifies a w idth pulse for the A trigger.
TRIGGER:A:PULSE:CLASS? might return :TRIGGER:A:PULS E:CLASS
GLITCH
, indic
ating that a pulse was found that is of the specified polarity and
width.
TRIGger:{A|B}:PULse:GLItch? (Query Only)
This query-
only command returns the current glitch pulse trigger parameters. This
command query is equivalent to selecting Glitch Setup from the Trig menu and
viewing the current glitch trigger settings.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:GLItc h?
Related Commands
TRIGger:{A|B}:PULse:GLItch:POLarity, TRIGger:{A|B}:PULse:GLItch:
TRIGIF, TRIGger:{A|B}:PULse:GLItch:WIDth
Examples
TRIGGER:A:PULSE:GLITCH? might return
:TRIGGER:A:PULSE:GLITCH:W IDTH 2.0000E-09; FILTER
ACCEPT;POLARITY POSITIVE
.
TRIGger:{A|B}:PULse:GLItch:POLarity
This command sets or queries the polarity for A or B pulse glitch trigger. This
command is equivalent to selecting G litch Setup from the Trig menu and then
choosing the desired Polarity.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:GLItc h:POLarity
{POSITIVe|NEGAtive|EITher }
TRIGger:{A|B}:PULse:GLItc h:POLarity?
Related Commands
TRIGger:{A|B}:LEVel, TRIGger:{A|B}:PULse:GLItch:WIDth
Arguments
POSITIVe specifies that the instrument will only trigger when the polarity of the
glitch is positive.
2-522 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English