Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
MEASUrement:G
ATing {ON| OFF|<NR1>|ZOOM< x>|CURSor}
MEASUrement:GATing?
Arguments
ON turns on measurement gating.
OFF turns o f
f measurement gating.
<NR1> = 0 turns off measurement gating; any other value turns on measurement
gating.
ZOOM<x> turns on gating, using the left and right edges of the zoom box. <x>
specifies t
he zoom window, which ranges from 1 through 4.
CURSOR limits measurements to the portion of the waveform between the vertical
bar curso
rs, even if they are off screen.
Examples
MEASUREMENT:GATING ON turns on measurement gating.
MEASUREMENT:GATING? might return :MEASUREMENT:GATING CU RSOR,
indicating that measurements are limited to the portion of the waveform between
the ve
rtical bar cursors.
MEASUrement:IMMed? (Query Only)
This query-only command returns all immediate measurement se tup parameters.
Group
Measurement
Sy
ntax
MEASUrement:IMMed?
Examples
MEASUREMENT:IMMED? might return :MEASUREMENT:IMMED:TYPE
A
MPLITUDE; UNITS "V";SOUR CE1 CH1;SOURCE2 CH1;
SOURCE1:SIGTYPE PULSE; :MEASUREMENT:IMMED:SOURCE2:SIGTYPE
PULSE; :MEASUREMENT:IMMED:DELAY:EDGE1 RISE; EDGE2
RISE;DIRECTION FORWARDS; :MEASUREMENT:IMMED:REFLEVEL:METHOD
PERCENT; ABSOLUTE:HIGH 0.0000;LOW 0.0000;MID1 0.0000;MID2
0.0000;:MEASUREMENT:IMMED: REFLEVEL:PERCENT:HIGH 90. 0000;LOW
10.0000;MID1 50.0000;MID2 50.0000;:MEASUREMENT:IMMED:METH OD
HISTOGRAM;NOISE HIGH
.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-367

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English