Commands Listed in Alphabetical Order
(Glitch, Width
, Runt, Timeout, or Transition), and then choosing the desired
channel from the Source pull-down list.
Group
Trigger
Syntax
TRIGger:{A|B
}:PULse:SOUrce CH<x>
TRIGger:{A|B}:PULse:SOUrc e?
Related Commands
TRIGger:{A|B}:EDGE:SOUrce
Arguments
CH<x> specifies one of the input channels, which range from 1 through 4.
Examples
TRIGGER:A:PULSE:SOURCE CH4 sets Channel 4 as the source for the A pulse
trigger.
TRIGGER:A:PULSE:SOURCE? might return :TRIGGER :A:PULSE:SOURCE CH2,
indicating that the Channel 2 is the source for the A pulse trigger.
TRIGger:{A|B}:PULse:TIMEOut? (Query Only)
This query-only command returns the polarity and time-out duration
for the pulse
timeout trigger. This command is equivalent to selecting Timeout Setup from the
Trig menu and viewing the polarity in the Trigger When box and the Timer setting.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:TIMEO ut?
Related Commands
TRIGger:{A|B}:PULse:TIMEOut:POLarity, TRIGger:{A|B}:PULse:TIMEOut:
TIMe
Examples
TRIGGER:A:PULSE:TIMEOUT? might return
:TRIGGER:A:PULSE:TIMEOUT: POLARITY STAYSHIGH;TIME
2.0000E-9
, indicating that the polarity setting for the A pulse trigger is
STAYSHIGH (positive) and the timeout duration is 2 ns.
2-532 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
