Commands Listed in Alphabetical Order
MEASUrement:
ANNOTation:STAT E
This command sets or returns the state of visible measurement annotations.
Group
Measurement
Syntax
MEASUrement:ANNOTation:STA TE
{OFF|MEAS1|MEAS2|MEAS3|MEA S4|MEAS5|MEAS6|MEAS7|MEAS8}
MEASUrement:ANNOTation:STA TE?
Arguments
OFF turns o ff visible measurement annotations.
MEAS<x> turns on the display of visible measurement annotations for measurement
<x>,where<x>canbe1,2,3,4,5,6,7,or8. Theremustbeanactive
measurement before y ou can activate an annota tion for a specified measurement.
Examples
MEASUREMENT:ANNOTATION:STA TE MEAS2 turns on the display of visible
measurement annotations for measurement 2.
MEASUREMENT:ANNOTATION:STA TE? might return MEASUREMENT:
ANNOTATION:STATE OFF
, indicating that no measurement annotations are active.
MEASUrement:ANNOTation:TYPe
This command sets or queries the type of annotations being used. This command
is similar to setting t
he annotation type in the Measure > Annotation menu.
Group
Measurement
Syntax
MEASUrement:ANNOTation:TYP e {STANdard|DETAiled}
MEASUrement:ANNOTation:TYP e?
Arguments
STANdard sets the annotation type to STANDARD.
DETAiled sets the annotation type to DETAiled, so that more detailed annotations
are displayed.
Examples
MEASUREMENT:ANNOTATION:TYP E DETAIL ED sets the measurement annotation
type to detailed.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-365
To Next Page
Loading...
Need help?
General
