Tektronix DPO70000 Series

Commands Listed in Alphabetical Order
HD1080P24 argu
ment sets the instrument to trigger on HDTV 1080/24
progressive format.
HD1080P25 arg
ument sets the instrument to trigger on HDTV 1080/25
progressive format.
HD1080P30 a
rgument sets the instrument to trigger on HDTV 1080/30
progressive format.
HD1080P50 a
rgument sets the instrument to trigger on HDTV 1080/50
progressive format.
HD1080P60
argument sets the instrument to trigger on HDTV 1080/60
progressive format.
HD1080SF
24
argument sets the instrument to trigger on HDTV 1080/24 segmented
frame format.
Examples
TRIGGER:A:VIDEO:STANDARD NTSC sets the instrument to trigger on
NTSC-standard video signals.
TRIGGER:A:VIDEO:STANDARD? might return :TRIGG ER:A:VIDEO:STANDARD
NTSC
, indicating that the standard for the A video trigger is set to NTSC.
TRIGger:AUXLevel
This command sets or queries the auxiliary (Aux) level for the edge trigger. This
command supersedes any other argument that sets the auxiliary trigger level.
Group
Trigger
Syntax
TRIGger:AUXLevel {<NR3>|ECL|TTL}
TRIGger:AUXLevel?
Related Commands
TRIGger:{A|B}:EDGE:SLOpe, TRIGger:{A|B}:EDGE:SOUrce
Arguments
<NR3> is the auxiliary level in volts.
ECL specifies a preset ECL level.
TTL specifies a preset TTL level.
Examples
TRIGger:AUXlevel TTL This command sets the auxiliary level for the edge
trigger to TTL.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-607